Firmware R6

Firmware R62020-03-03T16:08:31+02:00
The display shows the error message: Firmware not found2020-03-16T11:08:05+02:00

Firmware not found can have various causes.

Once you have received the message on the display, do the following before you try and test:

  • R6 system: take the control unit out and put it in so that it restarts.
  • R7 system: switch the control unit off and on briefly

1. Have you put the files directly on the stick or in a folder? You must put the files directly in the root of the stick, not in a folder.

2. If you view the files on the stick, you will see FIRMWARE.BIN or you may see FIRMWARE (2) .BIN. In the last example, your PC / Mac has downloaded the file multiple times and your browser automatically places an extension after it. Delete the extension so that it really has FIRMWARE.BIN (this applies to all files of the update)

3. Problems with the USB stick, format your usb stick and try again. Format USB stick with Windows

To format a USB stick, proceed as follows:

Select Open Computer / My Computer / This PC via the start button (depending on your Windows version). You will see the connected drives in this window.

  • Click with the right mouse button on the USB stick that you have connected and will use.
  • Then click Format.
  • The window will then open with the title of the drive letter indicating which disk will be formatted.
  • Choose FAT or FAT 32 as the file format if the capacity of the stick exceeds 2 GB.
  • Check the box next to Quick Format
  • Press start.
The display shows the error message: USB stick not found2020-03-16T11:08:06+02:00

The system does not recognize the USB stick.

A possible solution could be to format the USB stick and try again.

Once you have received the message on the display, do the following before you try and test:

  • R6 system: take the control unit out and put it in so that it restarts.
  • R7 system: switch the control unit off and on briefly

Format USB stick with Windows:

To format a USB stick, proceed as follows:

  • Select Open Computer / My Computer / This PC via the start button (depending on your Windows version). You will see the connected drives in this window.
  • Click with the right mouse button on the USB stick that you have connected and will use.
  • Then click Format.
  • The window will then open with the title of the drive letter indicating which disk will be formatted.
  • Choose FAT or FAT 32 as the file format if the capacity of the stick exceeds 2 GB.
  • Check the box next to Quick Format
  • Press start.
Format USB stick with Windows2020-03-16T11:08:07+02:00

To format a USB stick, proceed as follows:

Select Open Computer / My Computer / This PC via the start button (depending on your Windows version). You will see the connected drives in this window.

Click with the right mouse button on the USB stick that you have connected and will use.

Then click Format.

The window will then open with the title of the drive letter indicating which disk will be formatted.

  • Choose FAT or FAT 32 as the file format if the capacity of the stick exceeds 2 GB.
  • Check the box next to Quick Format
  • Press start.
The software update files cannot be opened .2020-03-16T11:08:07+02:00

No, the software files are machine language, and you will not get the downloaded files opened with a computer.

This is not necessary either.

After the download you only have to copy the files (copy right mouse button) and place (paste right mouse button) on an empty USB stick.

Where can I see what my current software version is?2020-03-16T11:08:10+02:00

If you place the control module in the system (in a fully connected system), it starts up and the text Travelvision appears, followed by the software version 2. *. *

Firmware R6

Download the FIRMWARE.BIN, EEPROM.BIN and FIRMWARE.BIN files below and then copy these files onto an empty USB stick.
You cannot open these files, but you must save them on an empty USB stick.

Firmware version March 2020: 2.0.9

DOWNLOAD >> FIRMWARE.BIN
DOWNLOAD >> EEPROM.BIN
DOWNLOAD >> TUNER.BIN

To transfer the firmware, the control module must be placed in a fully connected system!

After you have connected the Travel Vision R6 and placed the control module in the system, place the USB stick in the USB slot on the back of the control module.

Then carry out the following procedure:

• Press Menu and use the arrow keys to select: firmware

• Press enter, you will see the installed firmware version, then press enter again, you will get the message:

Setting: Firmware update, Are you sure?

• Press enter again to confirm. The system is now updated with new firmware and then reboots automatically.

• After this you can remove the USB stick from the USB slot, the system is now equipped with the new firmware and ready for use.

Where can I see what my current firmware version is?
If you place the control module in the system (in a fully connected system), it starts up and the text Travelvision appears, and then the installed firmware version *. *. ** appears.