How can I see which version of firmware is in the system?

You can only see this by removing a log file from the control box and viewing it on a PC.

Logfile TVA control box:

• Switch off the antenna with the power button on the controller (6)
• Insert an empty USB stick in the USB port (9). (format the USB stick FAT 32)
• Switch on the antenna with the control box, button (6).
• The red LED (7) comes on and you will see the green LED (8) flash about 4 times and then light continuously.
• Then both LEDs go out.
• Remove the USB stick.
• The motoSat.log logfile is now on the USB stick

You can view this file with your PC as a text file, if you open this file you will see:

 

S1|f: *****,sr:*****,p:H,el:***,az:***,epos:****,sk:**,

S2|f: *****,sr:*****,p:H,el:***,az:***,epos:****,sk:**,

S3|f: *****,sr:*****,p:H,el:***,az:***,epos:****,sk:**,

S4|f: *****,sr:*****,p:H,el:***,az:***,epos:****,sk:**,

S5|f: *****,sr:*****,p:H,el:***,az:***,epos:****,sk:**,

S6|f: *****,sr:*****,p:H,el:***,az:***,epos:****,sk:**,

S7|f: *****,sr:*****,p:H,el:***,az:***,epos:****,sk:**,

S8|f: *****,sr:*****,p:H,el:***,az:***,epos:****,sk:**,

POS|selSat:*,mxelpos:***,mnelpos:***,log:*,

AZS0|spd: *,dpwm: ***,mpwm: ***,mxpwm: ***,

AZS1|spd: **,dpwm: ***,mpwm: ***,mxpwm: ***,

ELS0|spd: *,dpwm: ***,mpwm: ***,mxpwm: ***,

ELS1|spd: **,dpwm: ***,mpwm: ***,mxpwm: ***,

MOTOR|type: *,elTmout: *,azTmout: *,

MISC|NitEn: *,LogS:*****,skewEn: *,demoMode: *,

LNB|LnbType:*,LosLow: ****,LosHigh:*****,

MTV9r8_2016/5/27:16 V1_R3_24.11.2014

 

The marked digits is the version number of the firmware. In this case version 9.8.

The * stars have numbers and depend on your system.

You can also e-mail this file as an attachment to info@travel-vision.com if you have any questions.