The message relates to your receiver or TV input. Before checking the following: Remove the control panel from the R6 / 7 after the system has been aligned and optimized! Individual receiver connected to your TV: Check if the correct source input has been selected from your TV. Press Source on the TV remote control and [...]
Check whether your subscription / smart card is still active. Check skew from LNB Blockade satellite (obstacle / tree etc) Receiver does not send LNB voltage (receiver defective) You are outside the footprint of de satellite If you cannot find the cause, we recommend that you have the system including receiver checked at your dealer.
You connect a completely new receiver (or TV with built-in satellite receiver), and the R6 system does not start up. Some satellite receivers have the property that if the channellist not is installed, no LNB voltage is delivered. this LNB voltage is needed to power up the R6 antenna. You have 2 options: Connect the receiver [...]
Check the connection cables between your satellite receiver and your TV. Switch the receiver and TV sequentially off and on. Consult the manual of your satellite tuner / TV if necessary. Check the coaxial cables between the antenna and the receiver, with any switch / junction box
