Faults with R7 system

Satellite found but you do not have all or any channels:

By |2020-03-16T11:08:07+01:00October 31st, 2019|Categories: , , |

Check whether your subscription / smart card is still active. Check skew from LNB Blockade satellite (obstacle / tree etc) Receiver does not send LNB voltage (receiver defective) You are outside the footprint of de satellite If you cannot find the cause, we recommend that you have the system including receiver checked at your dealer.

Comments Off on Satellite found but you do not have all or any channels:

You hear a rattling noise but the R6 / 7 is not running.

By |2020-03-16T11:08:12+01:00October 30th, 2019|Categories: , |

The motor pins of the control unit do not rotate properly in the black inserts of the system. Check whether the control unit is properly placed in the system. If necessary, remove the control unit and plug in again. The black inserts must be replaced, contact your Dealer

Comments Off on You hear a rattling noise but the R6 / 7 is not running.
Go to Top