You update your antenna with the wrong software from another maritime system. You can restore this, but unfortunately some extra actions are needed. For this you need the software of both systems (both software from the wrong and correct system). Download the software from both systems and save for later use. Below the recovery manuals, [...]
Firmware not found during an update can have various causes. 1. Have you put the files directly on the stick or in a folder? You must put all files directly in the root of the stick, not in a folder. 2. If you look at the files on the stick you see for example FIRMWARE.BIN or [...]
No tuner settings are enable, repeat the software update procedure. Check the cable and connections of the control unit
The system does not recognize the USB stick. A possible solution could be to format the USB stick and try again. Format USB stick with Windows: To format a USB stick, proceed as follows: Select Open Computer / My Computer / This PC via the start button (depending on your Windows version). You will see the [...]
You cannot open the files with your PC. You only need to copy them (copy right mouse button) and place them (paste right mouse button) on an empty USB stick. Due to the anti-virus programs installed on your PC, you may not be able to do this directly from your email program. In this case you [...]
You can see this in the menu of the MCM control unit. Press ENTER for about 2 seconds to get into the menu Select with arrow key: Info and press ENTER Select with arrow key: Software version and press ENTER. The software version ODU (antenna) and MCM (Control Panel) is displayed Press ESC to return
