Firmware not found can have various causes. Once you have received the message on the display, do the following before you try and test: R6 system: take the control unit out and put it in so that it restarts. R7 system: switch the control unit off and on briefly 1. Have you put the files directly [...]
The system does not recognize the USB stick. A possible solution could be to format the USB stick and try again. Once you have received the message on the display, do the following before you try and test: R6 system: take the control unit out and put it in so that it restarts. R7 system: switch [...]
To format a USB stick, proceed as follows: Select Open Computer / My Computer / This PC via the start button (depending on your Windows version). You will see the connected drives in this window. Click with the right mouse button on the USB stick that you have connected and will use. Then click Format. The [...]
No, the software files are machine language, and you will not get the downloaded files opened with a computer. This is not necessary either. After the download you only have to copy the files (copy right mouse button) and place (paste right mouse button) on an empty USB stick.
If you place the control module in the system (in a fully connected system), it starts up and the text Travelvision appears, followed by the software version 2. *. *
