You want to have your system checked
Please contact a dealer
Please contact a dealer
This is possible, it has been tested with a total coax length of 20 meters.However, it is important that you use a good quality coax cable and F-couplings.
DiSEqC (Digital Satellite Equipment Control), pronounced "Dai-sek" is a communication protocol between a satellite receiver and the TVA roof antenna. Depending on the chosen channel of your receiver (or TV with built-in receiver), the system automatically searches for the desired satellite. The TVA roof antenna is standard (only TVA systems supplied from March 2016) programmed for [...]
The TVA 80 comes standard with a Twin LNB. This gives the possibility to connect 2 receivers that can work independently of each other. A twin LNB in combination with other TVA versions is not possible
No, this is not possible
This depends on your type of system with LNB version: Single LNB version (TVA 65 and SAT 85) Because the receiver is connected with the single LNB and 1 coax cable, only the recording and viewing combination between all channels on the same transponder is possible. Twin LNB version (TVA 80 and Premium) The receiver must [...]
Video loss or poor signal on all channels Receiving equipment for your TV is sensitive. On this page you will find more information about possible causes of malfunctions and associated solutions Weather The digital TV signal is sent through the air. Anything that can stand in the way of this signal (especially thunder or heavy rain) [...]
Due to the curvature of the earth, the polarization plane of the satellite signal has changed in certain regions. Certainly in the outer areas of the receiving area, for example, the deviation is much greater compared to receiving in the Netherlands. As a result, it may be necessary to slightly rotate the LNB (head) around its [...]
Check Skew Only for LNB institutions TVA 65 model 2015 The LNB is provided with a scale. A positive skew means turning the LNB clockwise (seen from the LNB towards the dish!) And with a negative skew counterclockwise. This Skew can be set manually by slightly rotating the LNB in the mounting ring. The table below [...]
Beware only models from 2016 Set Skew manually A positive skew means turning the LNB clockwise (seen from the LNB towards the dish!) And with a negative skew counterclockwise. This Skew can be set manually by slightly rotating the LNB in the mounting ring. Note that the sticker with scale can be reversed, turning to the [...]